HYDRA CRANE

Hydra Crane is a mobile crane that is designed to travel on public roads, however Pick and 

Carry cranes have no stabilized legs or outriggers and are designed to lift the load and 

carry it to its destination, within a small radius, then be able to drive to the next job.

The capacity range is usually ten to Sixteen tonnes maximum lift, although this is much less 

at the tip of the boom.

Many steel fabrication yards also use Hydra cranes as they can "walk" with fabricated steel 

sections and place these where required with relative ease.

SPECIFICATION : ACE RHINO 110 MODEL

Lifting capacity: 11 Tonnes

Maximum outreach: 6.1 Mtrs

Maximum Height: 9.05 Mtrs.

Top Speed (Without Load): 28 K mph

Engine Simpson's: S433, 4 cylinders, water cooled, diesel engine, with a rated power of 49 

BHP at 2200 RPM.

Transmission: Heavy duty sliding mesh with 6 Forward and  2   Reverse Speeds.

Steering: Hydraulically operated with 55° articulation on either   side and a turning radius of 
4.9 Mtrs.

Brakes: Pneumatically assisted hydraulic brakes.

Hydraulic System: Intra vane type main pump, 4 spools control valve, and 

hydraulically operated WINCH.

Boom: 2 Part boom with manually operated extension.

Operating Weight: 8600 Kg.